Dust Extractors
All the models of well-known brands such as Makita, TREND and FESTOOL we offer are suitable for wet and dry vacuuming. They offer protection against dust and of course are invaluable when cleaning up. All models can be attached to our routing, sawing or sanding tools to provide dust free working. Our industrial models are just at home on a construction site as in the workshop.
Read more
for D 50/D 36/D 27
In stock, delivery in 1-2 business days
Maximize the efficiency of your dust collection system | For Ø 100 mm
In stock, delivery in 1-2 business days
Diameter: 50 mm | Length: 4 m
Delivery time 2 business days
For Ø 25-150mm | 7 different sizes
In stock, delivery in 1-2 business days
Ensures a completely closed extractor
Delivery time 2 business days
for D 27/D 36 | Width: 300 mm
In stock, delivery in 1-2 business days
5 different sizes | easy to cut down
In stock, delivery in 1-2 business days
For connecting suction hoses D 50/D 36/D 27
In stock, delivery in 1-2 business days
For hoses with Ø 100 mm
In stock, delivery in 1-2 business days
For hoses and ducts with Ø 100 mm
In stock, delivery in 1-2 business days
For hoses and ducts with Ø 100 mm
In stock, delivery in 1-2 business days
For hoses with Ø 100 mm | 45°
In stock, delivery in 1-2 business days
For hoses with Ø 100 mm | Aluminium
In stock, delivery in 1-2 business days
Replaces the standard filter in wet operation | for Makita 446L
In stock, delivery in 1-2 business days
Set of adapters, among others for Kreg, Trend & Woodpeckers | ID/AD 35/58 mm & ID/AD (step adapter) 33 - 48 mm/39- - 48 mm
In stock, delivery in 1-2 business days
Step adapter for suction hoses 54/48 and 39/33mm
In stock, delivery in 1-2 business days
Adapter for suction hose | Outer diameter (front): 58 mm | Inner diameter (rear): 35 mm
In stock, delivery in 1-2 business days
Socket for connection to Deros sanders | Ø 36/27 mm
In stock, delivery in 1-2 business days
Reduces the diameter of vacuum cleaner connections | Outer Ø1: 58mm | Inner Ø2: 35 mm | For standard vacuum cleaners
In stock, delivery in 1-2 business days
Replacement fine filter | Suitable for: Holzprofi Maker TA15
In stock, delivery in 1-2 business days
Replacement pre-filter | Suitable for: Holzprofi Maker TA15
In stock, delivery in 1-2 business days
suitable for: Harvey G-700
Delivery time 2 business days
Wireless remote control for extractors | Quick pairing | Easy & intuitive | Flexibly customisable
Delivery time 2 business days
Antistati | consisting of extraction hose D 27x2.0 m-AS | extraction hose D 36x1m-AS | Y-connector | can be used with all underfloor saws and table saws
In stock, delivery in 1-2 business days
The special demands on the industrial vacuum cleaner
Especially in a carpentry workshop there can be an enormous amount of fine dust produced. This not only make the place untidy but can be very unhealthy. Some types of dust can be really dangerous for the lungs. Therefore, a workshop vacuum cleaner must be installed to keep the fine dust in the workshop to a minimum. Large wood chips and shavings should also not be a problem. The ability to vacuum up liquids can also prove very useful in some situations.
the Dust classifications
When choosing a dust extractor the classification of the filter system is important. There are 3 classes
- L (Low) Class ≤ 1.0% Dusts with maximum allowable concentrations (MAC)>1mg/m³
- M (Medium) Class <0.1% Dusts with maximum allowable concentrations (MAC)≥0.1mg/m³
- H (High) Class <0.005% Dusts with maximum allowable concentrations (MAC)<0.1mg/m³
L class extractors can be compared to domestic vacuum cleaners and should only be used with softwoods. The usual workshop dust extractor is a class M, that means that 99.9% of dust is trapped in the filter. That is needed when working on hardwoods, MDF, brick etc. Class H are needed for specialist work for example where carciogenic materials are involved.
Which Dust Extractor is right for me?
You should consider the amount of work you will be doing so you can judge the volume you need, together with which materials are to be worked on. If you are using the dust extractor in a professional workshop you should make sure you know the legal requirements in your country.