Dust Extractors
All the models of well-known brands such as Makita, TREND and FESTOOL we offer are suitable for wet and dry vacuuming. They offer protection against dust and of course are invaluable when cleaning up. All models can be attached to our routing, sawing or sanding tools to provide dust free working. Our industrial models are just at home on a construction site as in the workshop.
Read more
Customise your workshop extraction system
Item no.: I-STPO-SET100BDelivery in 1-2 business days
for SYS-AIR | Ø 200mm | Length 6m
Item no.: F-577964Delivery in 1-2 business days
For fixing the cable to the suction hose | 5 Pieces
Item no.: F-205294Delivery in 1-2 business days
Can be cut to Ø 25 | 34 | 42 mm | Universal | Customisable | Flexible
Item no.: FO-CCU224Delivery in 1-2 business days
Ideal for engraving and cutting lasers | 2 activated carbon filters | up to 4000 operating hours
Item no.: I-151-MFLUX5-CFM9BDelivery in 1-2 business days
Customise your workshop extraction system | Includes 8 extraction pipes
Item no.: I-STPO-SET100PDelivery in 1-2 business days
Systainer SYS3 M437 | Many accessories
Item no.: F-577258Delivery in 1-2 business days
For 4 hoses with Ø 100 mm and 1 hose with Ø 150 mm | For connecting engraving and cutting lasers
Item no.: I-151-MFLUX5-OSDelivery in 1-2 business days
Versatile wet/dry vacuum cleaner | Automatic filter cleaning | Class M | Fully equipped
Item no.: B-0-601-9C3-100Delivery in 1-2 business days
Ideal for engraving and cutting lasers | 1 activated carbon filter | up to 4000 operating hours
Item no.: I-151-MFLUX5-CFM9Delivery in 1-2 business days
Mobile 18V wet/dry vacuum cleaner | Rotary airflow technology | Class L | Bagless
Item no.: B-0-601-9C6-302Delivery in 1-2 business days
For the SYS-AIR | Attaches to the ceiling | Systainer format
Item no.: F-578357Delivery in 1-2 business days
for SYS-AIR H | > 99.995% filtration in dust class H
Item no.: F-577975Delivery in 1-2 business days
For hose diameter 100 mm
Item no.: I-121-JW1003Delivery in 1-2 business days
For SYS-AIR | Pack of 5
Item no.: F-577977Delivery in 1-2 business days
Eliminates odours and exhaust fumes | 2 activated carbon filters | up to 4000 operating hours
Item no.: I-151-MFLUX5-CFM3BDelivery in 1-2 business days
Filters 99.99% of particles larger than 0.3 microns | 1 piece
Item no.: I-151-MFLUX5-HFDelivery in 1-2 business days
for SYS-AIR M | > 99.9% filtration in dust class M
Item no.: F-577968Delivery in 1-2 business days
Eliminates odours and exhaust fumes | 1 activated carbon filter | up to 4000 operating hours
Item no.: I-151-MFLUX5-CFM3Delivery in 1-2 business days
The special demands on the industrial vacuum cleaner
Especially in a carpentry workshop there can be an enormous amount of fine dust produced. This not only make the place untidy but can be very unhealthy. Some types of dust can be really dangerous for the lungs. Therefore, a workshop vacuum cleaner must be installed to keep the fine dust in the workshop to a minimum. Large wood chips and shavings should also not be a problem. The ability to vacuum up liquids can also prove very useful in some situations.
the Dust classifications
When choosing a dust extractor the classification of the filter system is important. There are 3 classes
- L (Low) Class ≤ 1.0% Dusts with maximum allowable concentrations (MAC)>1mg/m³
- M (Medium) Class <0.1% Dusts with maximum allowable concentrations (MAC)≥0.1mg/m³
- H (High) Class <0.005% Dusts with maximum allowable concentrations (MAC)<0.1mg/m³
L class extractors can be compared to domestic vacuum cleaners and should only be used with softwoods. The usual workshop dust extractor is a class M, that means that 99.9% of dust is trapped in the filter. That is needed when working on hardwoods, MDF, brick etc. Class H are needed for specialist work for example where carciogenic materials are involved.
Which Dust Extractor is right for me?
You should consider the amount of work you will be doing so you can judge the volume you need, together with which materials are to be worked on. If you are using the dust extractor in a professional workshop you should make sure you know the legal requirements in your country.