Router Guide Bushes & Sub-Bases
Guide bushes for routers, also known as copy sleeves or thrust rings, are required to guide the router along a template or stop if you do not use router cutters which have their own ball bearing. We offer one of the widest ranges of copy rings for routers, suitable for direct mounting on many routers, or by means of adapter plates of the UNIBASE or FRB type on almost all routers on the market. Basically there are two quality levels of copy rings in our shop:
- Copy tubes made of steel: are very precise and durable
- Copy rings made of plastic: are recommend the hobby craftsman for occasional use
OD: 11.1 mm l Sleeve 4 mm
In stock, delivery in 1-2 business days
Template Guide Ø: 17 mm | With Quick-fastening Bayonet lock
In stock, delivery in 1-2 business days
Template Guide Ø: 13 mm | With Quick-fastening Bayonet lock
In stock, delivery in 1-2 business days
Template Guide Ø: 16 mm | With Quick-fastening Bayonet lock
In stock, delivery in 1-2 business days
Screws f. Guide Bush2Ba x 6.35 mm (pack of 10) | 2BA X 6,35 mm
In stock, delivery in 1-2 business days
Template Guide Ø: 40 mm | With Quick-fastening Bayonet lock
In stock, delivery in 1-2 business days
Template Guide Ø: 27 mm | With Quick-fastening Bayonet locks
In stock, delivery in 1-2 business days
Guide Bush ring 30mm to 53,9mm | 30mm - 53.9mm
In stock, delivery in 1-2 business days
Template Guide Ø: 30 mm | With Quick-fastening Bayonet lock
In stock, delivery in 1-2 business days
Template Guide Ø: 24 mm | With Quick-fastening Bayonet lock
In stock, delivery in 1-2 business days
Guide Bush -Rings | suitable for GB793, gives 14.3 mm OD, use with 3.2 mm cutter diameter
In stock, delivery in 1-2 business days
Copying ring KR-D 10,8/OF 1010 | D: 10,8 mm | d: 7,8 mm | For OF 900, OF 1000, OF 1010, OF 1010 R and KF
In stock, delivery in 1-2 business days
for OF 900, OF 1000, OF 1010, OF 1010 R, KF
In stock, delivery in 1-2 business days
Guide Bush -Set in 8 different sizes | Outside Ø 10, 12, 17, 20, 24, 27, 30 and 40 mm
In stock, delivery in 1-2 business days
For holding guide bushes | 9 hole patterns for trim routers | Glass fibre reinforced | Precision centring
In stock, delivery in 1-2 business days
For holding guide bushes | 18 hole patterns | Glass fibre reinforced | Precision centring | Ø 180 mm
In stock, delivery in 1-2 business days
for 1/4" (6,35mm) and 8mm shanks | max. Ø Centering head 40 mm
In stock, delivery in 1-2 business days
For holding guide bushes | 13 hole patterns for most small routers | Glass fibre reinforced | Precision centring
In stock, delivery in 1-2 business days
Adapter plate for router copy rings | for all routersn, undrilled, transparent, D=170 mm, thickness 8 mm
In stock, delivery in 1-2 business days
OD: 9.5 mm l ID: 7.9 mm l Sleeve 6 mm
In stock, delivery in 1-2 business days
KR-D 13,8/OF 900/1000/1010 Copy ring | D: 13,8 mm | d: 10,8 mm | For OF 900, OF 1000, OF 1010 and OF 1010 R
In stock, delivery in 1-2 business days
OD: 10.8 mm l ID: 8.8 mm l Sleeve 4.5 mm
In stock, delivery in 1-2 business days
KR-D17/OF 1010 Copy ring | D: 17 mm | d: 14 mm | For OF 900, OF 1000, OF 1010, OF 1010 R and KF
In stock, delivery in 1-2 business days
Steel or plastic copy rings to choose from
In combination with our routing templates for countering kitchen worktops, we recommend the use of steel thrust washers, as in these applications, on Because of the strong forces, plastic copy rings melt or break relatively quickly.
We recommend our plastic copy sleeves exclusively for use with the sample templates, e.g. Design Inlay Kit, SIGNCRAFTER letter routing templates or for simple work that requires cause little pressure on the copy rings. For all professional applications we recommend the use of steel sleeves.
Additional rings can also be used to reduce the thickness of the nose and thus the distance to the workpiece, especially during inlay work.