Breathing & face protection
Protection against dust, mist and toxic fumes
The best way to protect yourself from the hazards of fine dust generated during woodworking operations such as sanding, routing, sawing or turning is to wear a respirator mask. Respiratory filters are divided into 3 protection classes according to EN143 and are usually given a nominal protection factor (NSF). The NSF indicates the ratio of the concentration of pollutants in the air and inside the respirator.
Read more
Unique, reusable,- small, strong filters | max. protection against many gases, vapours, dust and mist
In stock, delivery in 1-2 business days
Storage box for Elipse ABEK1P3 half mask | inclusive belt holder
In stock, delivery in 1-2 business days
Protection against dirt, chemicals and UV radiation
In stock, delivery in 1-2 business days
Lightweight respirator for many applications | Up to 8 hours | 5 pieces
In stock, delivery in 1-2 business days
EFFICIENCY CLASSES OF DUST PROTECTION CLASSES
P1 = 80 %, NSF 4
P2 = 94 %, NSF 10
P3 = 99.95 %, NSF 40
PROTECTION AGAINST GASES AND VAPOURS
Respirators against gases and vapours have activated carbon filters responsible for the physical and/or chemical absorption of hazardous substances. These are highlighted by marked letters and colours.
A = Organic gases and vapours with a boiling point above 65°C
Class 1, 2, 3
B = Inorganic gases and vapours (excluding carbon monoxide)
Class 1, 2, 3
CLASSES
There are 3 protection classes for each type of gas filter, depending on the amount of pollutants the filter can absorb.
Therefore, the choice is based on the predicted concentration of the pollutant:
1 = low / 1,000 ppm
2 = medium / 5,000 ppm
3 = high / 10,000 ppm