Vario-Bench multifunctional table
The Vario-Bench multifunctional table system developed by sauter is a multifunctional workbench based on a well thought-out worktop with drill holes (20 mm diameter). With the intelligent hole grid of the MDF board, not only all applications, such as clamping, sanding or mounting of workpieces, can be carried out comfortably. The special highlight of the perforated board is the sawing to the exact degree at any desired angle, thanks to the bench hooks in combination with the guide rails from Festool or Makita.
Read more
Lever clamp for guide rails | Suitable for sauter profile rails and | Guide rails of the brands Festool, Makita and many more
Item no.: BE-GTR16S6HDelivery in 1-2 business days
Screw clamp for guide rails | Suitable for sauter profile rails and | Guide rails of the brands Festool, Makita and many more
Item no.: BE-GTR16B6Delivery in 1-2 business days
Toggle lever clamp with clamping bolt | Clamping bolt for Ø 20 mm hole systems
Item no.: RU-21124Delivery in 1-2 business days
Short workpiece fence to complement the long precision fence for the Vario-Bench as well as universal for multifunction tables with Ø 20 mm grid
Item no.: SA-VB-FENCE-SDelivery in 1-2 business days
Screw clamp for guide rails | Suitable for sauter profile rails and | Guide rails of the brands Festool, Makita and many more
Item no.: BE-GTR12Delivery in 1-2 business days
Simple and universal | 1 pair | for multifunctional tables with hole grid Ø 20 mm | For MFT 3 and Mobile Workshop MW 1000 and for SYS-MFT
Item no.: F-488030Delivery in 1-2 business days
Stably supported and perfectly aligned workpieces on the MFT | for the Vario-Bench as well as universally for multifunction tables with Ø 20 mm grid .
Item no.: SA-VB-FENCEDelivery in 1-2 business days
Smoothly and ergonomically glide over the Vario-Bench precision fence | Stop for perfect alignment of the workpiece on the multifunction table .
Item no.: SA-VB-RIDERDelivery in 1-2 business days
For using on multifunction tables such as Festool MFT | Hole diameter of 20 mm and plate thickness of min. 19 mm
Item no.: BE-BH-MFTDelivery in 1-2 business days
Magnetic bench dogs with low profile | perfect for surface finishing | 3 pieces | Ø 20 mm
Item no.: SA-VB-BDOG-LOWDelivery in 1-2 business days
Push rod clamp with horizontal base plate STC-HH with accessory set | For the use of BESSEY quick release skewers on multifunctional tables. | Clamping width 35 mm, clamping force 2500 N.
Item no.: BE-STC-IHH25-T20Delivery in 1-2 business days
Quick clamping system for stop rails Multifunctional tables
Item no.: RU-27536Delivery in 1-2 business days
Quick clamping system for stop rails Multifunctional tables
Item no.: RU-27666Delivery in 1-2 business days
With open arm and horizontal base plate | Adaptor for 20mm MFT | Opening 40mm | Adjustment 35mm | Pressure 2500N
Item no.: BE-STC-HH50-T20Delivery in 1-2 business days
For clamping on workbenches with fixed projection | Clamping system: Hole grid Ø 20 mm | Clamping width: 200 mm | Projection: 100 mm
Item no.: RU-27706Delivery in 1-2 business days
For clamping on workbenches | Clamping system: hole grid Ø 20 mm | Length: 253 mm | Max. Stroke compensation: 35 mm
Item no.: RU-27709Delivery in 1-2 business days
With open arm and horizontal base plate | Adaptor for 20mm MFT | Opening 60mm | Adjustment 35mm | Pressure 2500N
Item no.: BE-STC-HH70-T20Delivery in 1-2 business days
Vertical clamp with horizontal base plate STC-VH with accessory set | For the use of BESSEY quick release skewers on multifunctional tables | Span 40 mm, clamping force 2500 N.
Item no.: BE-STC-VH50-T20Delivery in 1-2 business days
For fitting the Bessey toggle clamps to MFT tables | Suitable for all multifunctional tables with 20mm holes
Item no.: BE-STC-SET-T20Delivery in 1-2 business days
Automatic adjustment to the material thickness | with - clamp 360°- rotatable on the platform
Item no.: KR-KBC3-BASDelivery in 1-2 business days
Adapter bracket | Size: 80 x 40 x 60 mm
Item no.: RU-27103Delivery in 1-2 business days
Adapter plate open Laterally open; with M6 threaded hole
Item no.: RU-27155Delivery in 1-2 business days
Adapter bracket open Size 80 x 40 x 60 mm
Item no.: RU-27104Delivery in 1-2 business days
Multifunctional table with perforated plate
More and more woodworkers are installing multifunctional tables in their workshops to enable as many different applications as possible when working, but often it is also a question of space. That's why the Vario-Bench from sauter is just the thing. Multifunctional tables are characterized by the fact that woodworkers can saw, mill, sand, plane, and much more on one table at the same time.
First and foremost is the issue of angle-accurate sawing. By attaching a guide rail to the marked positions, you can saw at precise angles in no time with a plunge saw or mill with a router. We also offer milling templates and bench hooks for DIY multifunction tables.
The concept of the vario-bench is to allow the cutting of materials to any angle required quickly and easily. There is no need to recalibrate for new angles. Just by moving the pins and guide rails precise cutting is possible in seconds.
" }, { "Frage": "Who is the Vario-Bench intended for?", "Antwort": "The Vario-Bench is primarily intended for the demanding woodworker for whom accuracy plays a major role, and the purchase of a classic stationary sliding saw table is because, of space or budget, not possible
" }, { "Frage": "What advantages does the Vario-Bench System offer?", "Antwort": "The main advantages are:
- Every full degree and some frequently used half degrees are instantly available
- Large, easy to read text reduces the possibility of errors.
- No calibration needed.
- High level of accuracy reguardless of the size of the piece.
- Frequently used angles such as 45° of 90° can be set simultaneously so only the guide rail needs to be moved
- No Plastic parts that can break or distort.
- The metal bench pins are precision milled for a perfect fit.
- The metal pins are double ended, each end has a slightly different size to allow for slight swelling or contracting of the bench due to humidity.
- All parts of the Vario-Bench can be purchased separately , allowing the woodworker compltet flexabilty to construct the bench as the need.
- The bench itself is extreamly stable allowing it to be used between two tressels if necessary alowing complete portability.
At first glance they look very similar, but there are big differences. The Vario-Bench offers far more possibilities, the Festool has holes primarily to use to fix the workpiece to the bench. Guide rails must be callibrated to get the correct angles. Whith the Vario-Bench this is not needed.
" }, { "Frage": "What other advantages does the Vario Bench offer?", "Antwort": "The Vario-Bench offers unprecedented stability although it is a lightweight bench. Grooves in the edges allow possibilities to combine tables together if needed. They can also be used with clamps.
" }, { "Frage": "Which diameter do the holes in the table have?", "Antwort": "The holes have a 20mm diameter and can therefore be used with most regular saw bench accessories.
" }, { "Frage": "Can the crossbars on the frame be moved?", "Antwort": "The crossbars and be moved to the required height allowing total flexability.
" }, { "Frage": "Can the bench top be turned over?", "Antwort": "It's possible to use both sides of the Vario-Bench top. However the writing is only on one side. Many people use the one side as a general workbench to avoid damaging the markings, and turn it over when precision cutting is required.
" } ]