Laguna Dust Systems
Clean air in smaller and larger workshops.
Wood dust poses not inconsiderable health risks. In addition to extracting power tools directly at the machine with a workshop vacuum cleaner, larger stationary machines should be connected to a chip extraction system and, if possible, the ambient air in the workshop should also be cleaned by a filter system.
Read more
suitable for: Harvey G-700
Delivery time 2 business days
2 suction nozzles | suction pipe | shut-off valve | incl. wall bracket
Delivery time 2 business days
Customise your workshop extraction system
In stock, delivery in 1-2 business days
for SYS-AIR | Ø 200mm | Length 6m
In stock, delivery in 1-2 business days
Ideal for engraving and cutting lasers | 2 activated carbon filters | up to 4000 operating hours
Delivery time 2 business days
Customise your workshop extraction system | Includes 8 extraction pipes
In stock, delivery in 1-2 business days
400V | mobile | 2-fold distributor
Delivery time 6 business days
0.3 micron replacement filter (set of 2) for Gyro-Air DF-700
Delivery time 2 business days
For 4 hoses with Ø 100 mm and 1 hose with Ø 150 mm | For connecting engraving and cutting lasers
In stock, delivery in 1-2 business days
Ideal for engraving and cutting lasers | 1 activated carbon filter | up to 4000 operating hours
Delivery time 2 business days
For the SYS-AIR | Attaches to the ceiling | Systainer format
In stock, delivery in 1-2 business days
for SYS-AIR H | > 99.995% filtration in dust class H
In stock, delivery in 1-2 business days
For hose diameter 100 mm
In stock, delivery in 1-2 business days
For SYS-AIR | Pack of 5
Delivery time 2 business days
Eliminates odours and exhaust fumes | 2 activated carbon filters | up to 4000 operating hours
In stock, delivery in 1-2 business days
Filters 99.99% of particles larger than 0.3 microns | 1 piece
In stock, delivery in 1-2 business days
for SYS-AIR M | > 99.9% filtration in dust class M
In stock, delivery in 1-2 business days
Eliminates odours and exhaust fumes | 1 activated carbon filter | up to 4000 operating hours
Delivery time 2 business days
400V | mobile | 3-way distributor
Delivery time 6 business days
Extraction systems and air filters from Laguna
BFlux1 - chip extraction for stationary machines
The BFlux1 extraction system from Laguna is a chip extraction system that is particularly suitable as a central extraction system for sanding machines, circular table saws and band saws in the smaller workshop. It is quiet but very powerful and provides effective filtration (0.2 - 2 micron, 99.97%; vacuum max. 1215 Pa; extraction rate 884 m3/h)..
The robust construction of the extraction unit is mobile on four swivel castors anywhere in the workshop, should you wish to bring the extraction unit to the machine. The BFlux1 is ideal for connecting to single machines, but it can also supply several machines with adapters and Y-pieces. In this application scenario, you should use gate valves to regulate and direct the airflow..
Aflux 12 - ambient air filtration
As a supplement to the extraction system, the use of the Aflux 12 air filter is recommended in larger workshops to remove wood dust and other suspended particles from the ambient air. The filter can be mounted under the ceiling (mounting material is included) and can be operated at three different performance levels (917, 1240 and 2038 m3/h). At the highest level, the air in a workshop of 6 x 6 x 2.5 m is thus cleaned up to 22 times an hour. The output is set by a timer via remote control. The degree of contamination of the filter can be read on a display to ensure the optimal performance of the system.