Circular Table Saws
You will find the following circular table saws in our programme:
- The famous Mafell Erika - the saw that almost everyone thinks of when they hear "underfloor pull saw".
- Festool offers two excellent underfloor pull saws (CS 50 and CS 70) in addition to its TKS 80 Precisio table saw.
- The Triton Workcenter TWX becomes a table saw with the TWX 7CS001 saw table insert module (another module turns the Workcenter into a router table).
Zero tolerance for tear-outs on the CTS | Pull-in protection | Exact
Item no.: SAW-CTS-TS-IDelivery in 1-2 business days
Zero tolerance for tear-outs on the JSS | Pull-in protection | Exact
Item no.: SAW-TSI-SJB-IDelivery in 1-2 business days
Compatable with the Erika 70 and 85 | With Fence Extention
Item no.: MAF-207912Delivery in 1-2 business days
Universal compatibility (approx. 685-800 mm) | Positive locking at both ends | Stability & repeatability
Item no.: HAR-804812Delivery in 4-5 business days
Popular table saw in trade and among ambitious woodworkers | Pull length: 330 mm | Can be swivelled from -3 to 48° | Saw blade Ø: 225 x 30 mm | NOT FOR SALE OUTSIDE EUROPE
Item no.: MAF-972001Delivery in 4-5 business days
Circular table saw ALPHA HW110SE-36 | COMPASS ST-1500 Sliding table | COMPASS RT-800 Stainless steel router table top | NOT FOR SALE OUTSIDE THE EU, SWITZERLAND AND NORWAY
Item no.: SET-HAR-804133Delivery in 4-5 business days
Compatable with the Erika 70 and Erika 85 Double clamping | fine adjustment | quick clamping system
Item no.: MAF-207506Delivery in 1-2 business days
No tear-outs with Dados on the PCS | Pull-in protection | Exact
Item no.: SAW-TSI-DLD-IDelivery in 1-2 business days
Compatable with the Erika 60 | With Fence Extention
Item no.: MAF-207914Delivery in 1-2 business days
Compatable with the Erika 70 and Erika 85 | With angle locking
Item no.: MAF-207910Delivery in 1-2 business days
Compatable with the Erika 60
Item no.: MAF-207548Delivery in 1-2 business days
Compatable with the Erika 70 and 85
Item no.: MAF-207507Delivery in 1-2 business days
Zero tolerance for tear-outs on the PCS | Pull-in protection | Exact
Item no.: SAW-TSI-SLD-IDelivery in 1-2 business days
Absolutely flat and durable - Harvey's cast iron table top | dimensions: 800 x 590 x 45 mm | compatible with the Harvey RF-36 milling fence
Item no.: HAR-800748Delivery in 1-2 business days
Floor hold-down device for T-slots
Item no.: HAR-800745Delivery in 1-2 business days
Transform your XTender Fence into a precision pattern and taper cutting system with full visibility and control.
Item no.: BOW-XT4Replenishment is on the way
Universal compatibility (approx. 685-800 mm) | Positive locking at both ends | Stability & repeatability
Item no.: HAR-804811Delivery in 4-5 business days
The centerpiece of the workshop and indespensible on the construction site
The table saw is an almost indispensable woodworking machine. In the carpentry/joinery workshop, in addition to the large circular table saw or sizing saw, you will often find one (or more) small circular table saws that are used for specific jobs or are available for mobile use on the construction site. For private users, the small underfloor pull saw or mobile table saw often takes the place of the large stationary machines, whether for reasons of space or cost.
To be able to work efficiently and safely on a table saw, it should have a certain minimum level of equipment. This includes the rip fence and a cross-cut fence to guide the workpiece safely and accurately. The safety guard and the riving knife serve to ensure safety at work, and for health protection it should be possible to connect an extraction system. In addition to this basic equipment, there are optional accessories that make the work easier. First and foremost are the push blocks and sticks and table extensions.
The different types of saw
Underfloor pull saws
The underfloor pull saw is the classic table saw for mobile use. A small, handy and light saw that can be quickly stowed in the vehicle and is just as quickly ready for use again on the construction site. It differs from the normal table saw in that the workpiece is not guided through the saw blade, but the saw blade is guided through the workpiece. However, it can also be used in the conventional way by locking the saw blade.
In its more than forty years of construction, the Erika from Mafell has always remained at the cutting edge through constant improvements. It offers comfort and safety features that make it popular with both commercial and private users for mobile and stationary use.
The CS 50 and CS 70 from Festool are characterised by a very low weight for the power offered. The extensive range of accessories for both machines proves to be practical, useful and well thought-out not only for use on the construction site, but also in the workshop.
Circular table saws
In contrast to the usual "construction site circular saws", the TKS 80 table saw from Festool is a high-quality and extremely precise saw that can be equipped with all the usual add-ons (fences, worktable extensions, sliding table and more). Particularly noteworthy is the integrated SawStop function, which offers an exceptionally high level of injury protection for the user. With non-conductive materials, it reliably prevents serious injuries caused by accidentally getting your fingers or hand caught in the running saw blade.
Workcenter
The Workcenter TWX from Triton is a multifunctional table that can be used for a variety of woodworking tasks. However, it stands out from other manufacturers' models because there are two modules that transform it into a router table or saw table. The TWX7CS001 circular saw module is equipped with a rip fence, a powerful motor and an integrated dust extraction system and weighs 15.2 kg.
Accessories for table saws
In addition to various push sticks and workpiece sliders, fences and pressure combs in particular serve to guide the workpiece safely on the table saw. We offer an extensive range of accessories for table circular saws, both manufacturer-specific for the table circular saws from our range (Mafell and Festool), as well as for mobile and stationary table circular saws from other manufacturers - right up to clamping devices from RUWI for large panel saws and sliding table saws.
Circular saw blades
The most important accessory for the circular saw is the saw blade. It is decisive for the cutting quality and also to a considerable extent for the safety at work on the circular saw. We offer a very wide range of saw blades from leading manufacturers (Freud, Trend, Festool, Mafell and others) that meet the demands of commercial users - even as a private user, you should not settle for anything less. You will find special circular saw blades for circular table saws as well as saw blades for other saw types, such as rocker saws, sliding table saws, panel saws and many more in our range.