Plunge saws
Circular plunge saws cut accurately and precisely
The versatile saws plunge into the workpiece to be machined and are relatively easy to handle. Plunge saws can be used on many materials including wood, steel, stone, concrete, laminate, metal, tiles, amoung others
Read more
For Plunge SawGKT 55 GCE Professional
Item no.: B-1-600-Z00-00MDelivery in 1-2 business days
For FS/2, FS/2-KP, FSK, MFT | 2 Pieces
Item no.: F-489570Delivery in 1-2 business days
Adhesive strips for guide rails | length: 6800 mm
Item no.: B-1-600-Z00-00EDelivery in 1-2 business days
Parallel cuts to a reference edge
Item no.: MAF-206073Delivery in 1-2 business days
Battery for Cordless models from Mafell | 18 V | 99 Wh | Li-HD
Item no.: MAF-094438Delivery in 1-2 business days
For rail fixing on the workpiece | For cross-cut rails from Mafell | 1 piece
Item no.: MAF-093281Delivery in 1-2 business days
Professional plunge-cut saw for discerning users Cutting depth: up to 57mm | Closed saw blade housing | In T-MAX In Fan-SET with additional sawblade and guide-rail F160
Item no.: MAF-1P0467Delivery in 2-3 business days
For FS/2, FS/2-KP, FSK, MFT | 2 Pieces
Item no.: F-578623Delivery in 1-2 business days
2x guide rails | 1x guide rail connector | 2x clamps | Carring bag
Item no.: MAF-209591Delivery in 1-2 business days
FS 1400/2 Guide Rail | Systainer SYS3 M 337 | NOT FOR SALE OUTSIDE EUROPE
Item no.: SET-F-577010Delivery in 2-3 business days
Systainer SYS3 M 437 | Guide Rail FS 1400/2 | NOT FOR SALE OUTSIDE EUROPE
Item no.: SET-F-576115Delivery in 2-3 business days
Powerful plunge-cut saw with guide rail and clamps | Anti-kickback function
Item no.: TS-534156Replenishment is on the way
for guide rails up to 1.6 m length
Item no.: MAF-095257Delivery in 1-2 business days
Quick charger for all 12V & 18V batteries from Mafell | Cross-manufacturer (CAS) | Charge level indicator | Temperature control
Item no.: MAF-094509Delivery in 1-2 business days
FS 1400/2 Guide Rail | Systainer SYS3 M 337 | NOT FOR SALE OUTSIDE EUROPE
Item no.: SET-F-577417Delivery in 2-3 business days
What is the difference between circular hand saws and circular plunge saws?
The biggest difference is the type of sawing itself: With a classic hand-held circular saw, the saw is normally guided into the edge of the piece to be machined,. The protective cover slides back and the blade cuts into the surface. The base, motor and blade are all in a fixed position.
With a plunge saw, the saw blade and the motor of the saw can be tilted or lowered though the base, so that the saw blade is literally plunged into the workpiece. A typical application example is a cut-out for a hob or sink in a kitchen worktop. However there are other advantages.
What advantages does a circular plunge saw have?
Dust extraction with a circular plunge saw
The saw blade of plunge saws is enclosed as much as possible above the material leaving ouly the part of the blade doing the cutting free. The removal of the dust is much improved. Less exhaust air is lost. Less dust is not only better for your health, it also saves cleaning up.
Circular plunge saws in use with guide rails
Plunge saws can easily be placed anywhere on the guide rail. With a hand-held circular saw, the protective hood must first be pulled back in order to accuratly place the saw onto the material. This is in particular relevant when working with a sawing table.
Storing a circular plunge saw
After use, the plunge saw can be conveniently placed on the flat base plate. The saw blade is retracted and cannot be damaged. A hand-held circular saw will always lie awkwardly on its side.