Festool STM and MFT worktables

BF-OF-CMS Arc milling hood | Connection dust extraction Ø: 27/36 mm

MFT/3-AR stop tab

Table extension VB-CMS | Max. Cutting width: 570 mm | Dimension length x width: 664 x 438 mm

VS connector

MFT/3-ZK additional clamping

MFT KAPEX-LP perforated sheet | Dimensions length x width: 814 x 526 mm, hole diameter: 20 mm

MFT/3-QT Cross brace | Package contents: 2 pcs.

Strong & quick hold in the MFT | for hole pattern Ø 20 mm | projection: 80 mm | 2 pieces

Multifunctional table for CONTURO edge banding machines | For small batches, straight edges, free-form elements and bevel edge gluing, angle from 0-47-° | At present shipping is only possible to the EU, Switzerland and Norway

Festool crosscut saw and MFT set | Dimensions (WxDxH) 713x500x470 mm | At present shipping is only possible to the EU, Switzerland and Norway

Festool sawing table and work table
Max. Support surface: 1800x2100 mm | Max. Load 150 kg | weight: 34 kg

Workbench clamps for Ø20mm holes | Sturdy construction | Horizontal & vertical | Secure hold

Clamp workpiece flat and immovable on the worktable | Rubberised clamping surfaces | Secure hold | Universally applicable

MFT/3-LP perforated plate | Dimensions length x width: 1102 x 718 mm, hole diameter: 20 mm

Festool MFT/3 | Table with perforated top and folding legs | At present shipping is only possible to the EU, Switzerland and Norway

Festool MFT/3 | Table with perforated top & folding legs | angle stop | stop rider | support unit | swivel unit | guide rail FS 1080/2 | deflector FS-AW | additional clamping | At present shipping is only possible to the EU, Switzerland and Norway

Table with perforated top and foldaway legs | For KS 88 KS 120

Abutment for horizontal clamps on perforated grid plates | Sturdy construction | Rubberised clamping surfaces | Universally applicable

Lever clamp for Ø 20 mm perforated grid panels and MFT | 80 mm extension

One-hand clamps for multi-function and hole grid tables | Clamping: 100mm | Sturdy construction | for Ø20mm holes

One-hand clamps for multi-function and hole grid tables | Clamping: 250mm | Sturdy construction | for Ø20mm holes

Clamping width: 160 mm | For FS/2, FS/2-KP, FSK, MFT

Festool Mobile Workshop MW 1000

Festool Mobile Workshop MW 1000