sauter Gluing Bridge Set, 12pc.

sauter gluing bridges, 12-pieces

The gluing bridges from sauter keep joints flush during gluing and at the same time visible and controllable.

The design of the sauter gluing bridges offers real added value compared to the competition!

Technical Data

• Material: Polypropylene
• Dimensions (L x W x H): 110 x 48 x 40 mm
• Support surfaces (L x W): 30 x 25 mm
• Bridging: (L x W): 45 x 25 mm
• Clamping surfaces, inside (L x W): 18 x 20 | 20 x 20 | 18 x 20 mm
• Slot (B): 9 mm
• Screw holes (Ø): 4.5 mm

Features and advantages

• Functionally braced design to prevent deformation even at high clamping pressures.
• Thick-walled polypropylene ensures lasting dimensional stability.
• Ideal addition for sauter body clamps to fix width gluing, such as for table tops, without displacement.
• The gluing bridges can be screwed onto a moulding with four screws each or inserted into the spars of the clamps through the slip-on grooves.
• The sauter gluing bridge set is sufficient for 6 clamping points, bridges the glue joint and keeps it visible and therefore controllable.
• Thanks to the triangular shape - inside and outside - the gluing bridges can also be used as angle clamps for 45° & 90°.
• Simply clamp on using screw clamps or one-handed clamps and let flush or true angles happen!

Scope of delivery

• 12x sauter gluing bridges in a box