Tormek DC-250 Diamond Wheel Coarse

Tormek DC-250 Diamond Wheel Coarse

Provides efficient sharpening and rapid repair of a dull or damaged edge.

This diamond grinding wheel can grind all types of materials, including steel, ceramics and carbide. The DC-250 Diamond Wheel Coarse fits the Tormek T-8 Original, Tormek T-8 Custom, Tormek T-7 and earlier models with a grinding wheel 250 mm (9 7/8") in diameter.

The DC-250 Diamond Wheel Coarse doesn't give a fine surface finish and should be followed up by sharpening with a finer grinding wheel, such as the DF-250 Diamond Wheel Fine or DE-250 Diamond Wheel Extra Fine

Technical Data

• Size of the grinding disc: Ø 250 x 50 mm
• Material: Steel with diamond coating
• Grit: 360
• Weight: 4.2 kg

Features and advantages

• High stock removal for repairing or reshaping cutting edges; reworking with a finer grinding disc necessary.
• Diamond grinding discs constantly maintain the same diameter and have an above-average service life.
• Suitable for almost all materials, including ceramics, steel and carbide.
• Can be used on the surface and side of the grinding stone, best used on the side in combination with the MB-102 multi-holder.
• Fits the Tormek T-7, T-8 and older models with a grinding disc diameter of 250 mm.
• The rust protection concentrate included in the scope of delivery ensures long-lasting corrosion protection. (10 ml concentrate to 250 ml water)
• Wet grinding extends the service life of the diamond disc and ensures a finer grinding surface.
• 2-year manufacturer's guarantee.

Scope of delivery

• 1x  DC-250 Diamond Wheel Coarse
• 1x rust protection concentrate ACC-150
• 1x instruction manual

Video