Trend T4EK with Trend Router Bits

Trend T4EK Router with Trend Router Bits

especially recommended for use in CNC-controlled machines and drill rigs

Lightweight, handy router, which can also be used free-hand operation. 

*The built-in restart protection prevents unintentional start-up of the machine after a power interruption. The control (switching on/off) of the router on the router table in connection with a protection/zero voltage switch is therefore no longer possible! Only the triggering of the emergency stop via the switch remains.

Technical Data

• Power / Voltage: 850 Watt / 230 Volt
• Noise level / Working noise level: 91.1 dB / 104.1 dB
• Adjustable speed: 11.500 - 32.000 rpm
• Vibration deflection: < 3.0m/s²
• Stroke: 0 - 35 mm
• Collet: 6 mm, 6.35 mm (1/4"") and 8 mm
• Copy ring: 16 mm
• Neck diameter for stationary operation: 43 mm
• Max cutter diameter: 30 mm
• Diameter of suction connection 34 mm
• Weight: 2,4 kg

12-piece bit Set from Trend Shank - 8 mm

Technical data and content:

• 1x Slot Routing Cutter: Ø 6,3 mm | NL: 16 mm
• 1x Slot Routing Cutter: Ø 12,7 mm | NL: 19 mm
• 1x Tine cutter: 14° | Ø 12.7 mm
• 2x rounding cutters with KL R6,35 & R9,5 mm
• 1x Chamfer Routing Cutterwith KL 45°
• 1x rebate cutter with 9.5 mm rebate depth
• 1x Trimming Router CutterØ 12,7 mm
• 1x Radius Router Cutterwith KL R6.3 mm
• 1x Radius Router CutterR6.35 mm
• 1x V-Slot Routing Cutter 45°
• 1x Ogee Bitmilling cutter with KL

Features and advantages

• Small, very light and handy
• Ideal for free routing without plunge base
• electronic speed regulation and soft start by solid shaft constant electronics
• with guide bush 16 mm
• suitable for routert bits with a max. diameter of 30 mm
• inclusive side stop
• including locking ON/OFF switch for stationary operation
• Fine height adjustment must be purchased separately --> Fine adjustment for T4EK
• Delivery in a case
• Restart protection: The router is not suitable for table/stationary use.*

Scope of delivery

• 1x router
• 12-piece cutter box
• 1x Fence
• 1x Dust Extraction socket
• 1x collet 6 mm
• 1x collet 6,35 mm (1/4 inch)
• 1x collet 8 mm
• 1x Slot Routing Cutter: Ø 6,3 mm | NL: 16 mm
• 1x Slot Routing Cutter: Ø 12,7 mm | NL: 19 mm
• 1x Tine cutter: 14° | Ø 12.7 mm
• 2x rounding cutters with KL R6,35 & R9,5 mm
• 1x Chamfer Routing Cutterwith KL 45°
• 1x rebate cutter with 9.5 mm rebate depth
• 1x Trimming Router CutterØ 12,7 mm
• 1x Radius Router Cutterwith KL R6.3 mm
• 1x Radius Router CutterR6.35 mm
• 1x V-Slot Routing Cutter 45°
• 1x Ogee Bitmilling cutter with KL
• 1x guide bush 16 mm
• 1x case

Video