Two Cherries chisel with 2-K handle, 12 mm

Two Cherries chisel with 2-component handle, 12 mm

This KIRSCHEN Two Cherries chisel is particularly suitable for soft to medium-hard wood due to the cutting angle of 25°.

Technical Data

• Blade made from special tool steel (+/- HRc 61)
• Handle made from 2-component plastic
• Cutting edge angle: 25°
• Cutting edge width: 12 mm
• Sides bevelled

Features and advantages

• Forged by hand for an improved material structure.
• Only high-carbon steels are used for the blades.
• Heat-treated in a salt bath for a hardness of approx. 61 Rockwell.
• Hardened over the entire usable length of the blade.
• Polished, groove-free surface for smooth cutting and easy plunging.
• Blade with side bevels to facilitate work close to the edge.
• For a razor-sharp finish, the cutting edge should be honed before first use.
Blades should be wiped with an oil cloth after use to prevent corrosion.
• The 2-component handle is flattened to prevent the tool from rolling off the table.
• The impact-resistant plastic handle with rubberised inserts fits comfortably in the hand.
• Ideal for use on the assembly line, in the workshop and outdoors.
• We recommend grinding a cutting edge angle of 28 - 30° for hard woods.

Scope of delivery

• 1x KIRSCHEN Two Cherries chisel with 2-K handle, 12 mm