Spiral Slot Cutters - Solid Carbide
The spiral-shaped flute, as known from classic twist drills, enables a continuous pulling cut. This leads to significantly less vibration than classic end mills with vertical cutting edges.
Difference between right-hand and left-hand twist?
Right-hand twist spiral end mills are particularly suitable for a clean milling base and transport chips away quickly and safely to the top. However, chipping may occur on the top of the workpiece.
D: 5 mm l NL: 17 mm l SL: 40 mm l GL: 60 mm l Left-hand twist
Item no.: KLE-T163-050-RDelivery in 1-2 business days
D:- 5 mm l NL:- 17 mm |; GL: 50 mm | Left twist
Item no.: KLE-T152-050-RDelivery in 1-2 business days
D: 5 mm | B: 17 mm | L: 50 mm | right-hand twist | 2-blade
Item no.: KLE-T142-050-RKDDelivery in 1-2 business days
D:- 5 mm l NL:- 17 mm |; GL: 50 mm | Left twist
Item no.: KLE-T152-050-RKDDelivery in 1-2 business days
D:- 5 mm l NL: 17 mm l GL: 50 mm l Right-hand twist
Item no.: KLE-T142-050-RDelivery in 1-2 business days
D: 6 mm | GL: 50 mm | NL: 21 mm | Z: 2 | S: 8 mm
Item no.: ST-SF1-8-6UDelivery in 1-2 business days
D: 6 mm | B: 27 mm | L: 60 mm | right-hand twist | 2-blade
Item no.: KLE-T142-061-RKDDelivery in 1-2 business days
D: 6 mm l NL: 22 mm l SL: 46 mm l GL: 70 mm l Left-hand twist
Item no.: KLE-T163-060-RDelivery in 1-2 business days
D 6 mm | NL 27 mm | S 8 mm | GL 70 mm
Item no.: E-10026Delivery in 1-2 business days
D: 6 mm l NL: 22 mm l SL: 46 mm l GL: 70 mm l Right-hand twist
Item no.: KLE-T162-060-RDelivery in 1-2 business days
D:- 6 mm l NL:- 17 mm |; GL: 70 mm | Left twist
Item no.: KLE-T152-060-RKDDelivery in 1-2 business days
D: 6 mm l NL: 27 mm l GL: 60 mm l Right-hand twist
Item no.: KLE-T142-061-RDelivery in 1-2 business days
D: 6 mm l NL: 17 mm l GL: 60 mm l Right-hand twist
Item no.: KLE-T142-060-RDelivery in 1-2 business days
D: 6 mm | B: 17 mm | L: 60 mm | right-hand twist | 2-blade
Item no.: KLE-T142-060-RKDDelivery in 1-2 business days
D: 6 mm | GL: 80 mm | NL: 45 mm | Z: 3 | S: 8 mm
Item no.: ST-SF1-8-6F3Delivery in 1-2 business days
D:- 6 mm l NL:- 27 mm |; GL: 70 mm | Left twist
Item no.: KLE-T152-061-RDelivery in 1-2 business days
D: 7 mm l NL: 32 mm l SL: 46 mm l GL: 80 mm l Right-hand twist
Item no.: KLE-T162-070-RDelivery in 1-2 business days
D: 7 mm l NL: 32 mm l SL: 46 mm l GL: 80 mm l Left-hand twist
Item no.: KLE-T163-070-RDelivery in 1-2 business days
D: 8 mm l NL: 22 mm l SL: 56 mm l GL: 80 mm l Right-hand twist
Item no.: KLE-T142-080-RDelivery in 1-2 business days
D:- 8 mm l NL:- 22 mm |; GL: 80 mm | Left twist
Item no.: KLE-T152-080-RKDDelivery in 1-2 business days
D: 8mm | NL: 22mm | GL: 80mm | Z2+2
Item no.: KLE-T156-080-RKDDelivery in 1-2 business days
D 8 mm | NL 32 mm | S 8 mm | GL 80 mm
Item no.: E-10030Delivery in 1-2 business days
D 8 mm | NL 42 mm | S 8 mm | GL 90 mm
Item no.: E-10031Delivery in 1-2 business days
D: 8 mm | B: 35 mm | L: 80 mm | right-hand twist | 2-blade
Item no.: KLE-T142-081-RKDDelivery in 1-2 business days
Spiral flute cutter for CNC machining.
The spiral groove, as known from classic twist drills, enables a continuous pulling cut. This leads to significantly less vibration than classic end mills with vertical cutting edges.
Difference between right-hand and left-hand twist
Right-hand spiral groove cutters are particularly suitable for a clean milling base and transport chips away quickly and safely to the top. However, chipping may occur on the top of the workpiece. Left-hand spiral groove cutters, on the other hand, prevent tear-out on the top of the workpiece, but push the chips downwards onto the groove base.
Cutters with left-hand spiral groove prevent tear-out on the top of the workpiece, but push the chips downwards onto the groove base.
Right-hand twist: Chip removal upwards.
Left-handed twist: Chip removal downwards.
Advantages of the DIA® PERFORMANCE finishing cutters.
- Stand life 4-5 x higher than solid carbide
- Right-hand twist for clean groove base
- Spiral cutting edges upwards for fast pull-through.
- Excellent end milling results
- Better chip clearance
- Low coefficient of friction for low working temperature
- Machining of aluminium and plastic materials without lubricant
Excellent results with the following materials:
- Hardwood, and softwood
- Mineral materials (e.g. CORIAN)
- Plastics (acrylic materials, Plexiglas, HDPE)
- Composite materials (HPL, AluDibond, Trespa ...)