Spiral Slot Cutters - Solid Carbide
The spiral-shaped flute, as known from classic twist drills, enables a continuous pulling cut. This leads to significantly less vibration than classic end mills with vertical cutting edges.
Difference between right-hand and left-hand twist?
Right-hand twist spiral end mills are particularly suitable for a clean milling base and transport chips away quickly and safely to the top. However, chipping may occur on the top of the workpiece.
D: 8 mm l NL: 22 mm l SL: 56 mm l GL: 80 mm l Left-hand twist
Item no.: KLE-T152-080-RDelivery in 1-2 business days
D: 8 mm | GL: 80 mm | NL: 42 mm | Z: 3 | S: 8 mm
Item no.: ST-SF1-8-8DPDelivery in 1-2 business days
D: 8 mm | NL: 32 mm | GL: 80 mm | Z: 2 | Up Cut | S: 8 mm
Item no.: E-20500Delivery in 1-2 business days
D: 8 mm | NL: 32 mm | SL: 48 mm | GL: 80 mm | DUAL-Cut
Item no.: I-C19008011Delivery in 1-2 business days
D: 8mm | NL: 32mm | GL: 80mm | Z2+2
Item no.: KLE-T156-081-RDelivery in 1-2 business days
D 8 mm | NL 32 mm | GL 80 mm | S 8 mm | Z 2 | Down Cut
Item no.: E-20600Delivery in 1-2 business days
D: 8 mm | NL: 35 mm | SL: 42 mm | GL: 80 mm | Left-hand twist
Item no.: KLE-T152-081-RDelivery in 1-2 business days
D: 8 mm | B: 35 mm | L: 80 mm | right-hand twist | 3-blade
Item no.: KLE-T143-081-RKDDelivery in 1-2 business days
D: 8 mm | B: 22 mm | L: 80 mm | right-hand twist | 2-blade
Item no.: KLE-T142-080-RKDDelivery in 1-2 business days
D:- 8 mm | NL:- 35 mm | SL: 42 mm | GL: 80 mm | Right-hand twist
Item no.: KLE-T142-081-RDelivery in 1-2 business days
D:- 10 mm- l- NL:- 45 mm- l- GL: 100 mm- l- Righthand-
Item no.: KLE-T142-101-RDelivery in 1-2 business days
D: 10 mm l NL: 35 mm l GL: 80 mm l Righthand
Item no.: KLE-T142-100-RDelivery in 1-2 business days
D 10 mm | NL 35 mm | S 8 mm | GL 80 mm
Item no.: E-10032Delivery in 1-2 business days
D: 10 mm | B: 45 mm | L: 100 mm | right-hand twist | 3-blade
Item no.: KLE-T143-101-RKDDelivery in 1-2 business days
D 10 mm l NL 45 mm | GL 100 mm | Left twist
Item no.: KLE-T152-101-RKDDelivery in 1-2 business days
D:- 10 mm l NL:- 45 mm |; GL: 100 mm | Left twist
Item no.: KLE-T152-101-RDelivery in 1-2 business days
D: 6 mm | NL: 19 mm | GL: 63 mm | S: 6 mm | Z: 2 | left twist
Item no.: AM-48218-KDelivery in 1-2 business days
D: 6 mm | NL: 25 mm | GL: 64 mm | S: 6 mm | Z: 2 | Right- Left twist
Item no.: AM-46175-KDelivery in 1-2 business days
D: 10mm | NL: 42mm | GL: 100mm | Z2+2
Item no.: KLE-T156-101-RDelivery in 1-2 business days
D: 3 mm | NL: 12 mm | GL: 50 mm | S: 6 mm | Z: 2 | left twist
Item no.: AM-48214-KDelivery in 1-2 business days
D 10 mm | NL 35 mm | GL 80 mm | S 10 mm | Z 2
Item no.: E-20501Delivery in 1-2 business days
D: 10 mm | B: 45 mm | L: 100 mm | right-hand twist | 2-blade
Item no.: KLE-T142-101-RKDDelivery in 1-2 business days
D 10 mm | NL 32 mm | GL 80 mm | S 10 mm | Z 2
Item no.: E-20601Delivery in 1-2 business days
D: 6 mm | NL: 19 mm | GL: 63 mm | S: 6 mm | Z: 2 | right-hand twist
Item no.: AM-48118-KDelivery in 1-2 business days
Spiral flute cutter for CNC machining.
The spiral groove, as known from classic twist drills, enables a continuous pulling cut. This leads to significantly less vibration than classic end mills with vertical cutting edges.
Difference between right-hand and left-hand twist
Right-hand spiral groove cutters are particularly suitable for a clean milling base and transport chips away quickly and safely to the top. However, chipping may occur on the top of the workpiece. Left-hand spiral groove cutters, on the other hand, prevent tear-out on the top of the workpiece, but push the chips downwards onto the groove base.
Cutters with left-hand spiral groove prevent tear-out on the top of the workpiece, but push the chips downwards onto the groove base.
Right-hand twist: Chip removal upwards.
Left-handed twist: Chip removal downwards.
Advantages of the DIA® PERFORMANCE finishing cutters.
- Stand life 4-5 x higher than solid carbide
- Right-hand twist for clean groove base
- Spiral cutting edges upwards for fast pull-through.
- Excellent end milling results
- Better chip clearance
- Low coefficient of friction for low working temperature
- Machining of aluminium and plastic materials without lubricant
Excellent results with the following materials:
- Hardwood, and softwood
- Mineral materials (e.g. CORIAN)
- Plastics (acrylic materials, Plexiglas, HDPE)
- Composite materials (HPL, AluDibond, Trespa ...)