Cutters with Replaceable Blades
Routing cutters with reversible blades made of carbide are available in different types of cutters. Whether groove cutters, face cutters, flush router bits with ball bearings or rebate cutters: The router bits are available in many diameters and deliver high-quality results in craftsman quality. They can be used on hand routers and stationary routing machines. The reversible blade router bits are also ideal for drilling into hard and soft wood.
Read more
E: 10° | D: 25mm | NL: 26mm | GL: 60mm | S: 8mm | SL: 30mm
Item no.: E-20395Delivery in 1-2 business days
WPL Slot Routing Cutter/ Reversable Blades- Slot Routing Cutter, Z1 | D: 8 mm l NL: 20 mm l GL: 60 mm | S: 8 mm
Item no.: I-F041-08081Delivery in 1-2 business days
D 8 mm | NL 20 mm | S 8 mm | GL 63 mm
Item no.: E-20040Delivery in 1-2 business days
2 x Replacable Blades | D: 19 mm | NL: 20 mm | GL: 75mm | S: 12 mm
Item no.: TI-PGC19-12RTDelivery in 1-2 business days
For use in stationary tables | D: 50 mm | NL: 30 mm
Item no.: SET-ASL20-12Delivery in 1-2 business days
E 90 ° | D 17 mm | NL 8,3 mm | S 8 mm | GL 63 mm
Item no.: E-20300Delivery in 1-2 business days
D: 22 mm | KL: 16 mm | NL: 9 mm | R: 3 mm | GL: 80 mm | S: 12 mm
Item no.: TI-XC306-3-12Delivery in 1-2 business days
Reversable Blades | D: 16 mm l NL: 28,3 mm l GL: 76 mm | S: 8 mm
Item no.: I-F045-16381Delivery in 1-2 business days
Slot Routing Cutter with single cutting edge | D: 15 mm l NL: 30 mm l GL: 80 mm l S: 8 mm
Item no.: TI-H1530-8RTDelivery in 1-2 business days
Rebate cutter HW with ball bearing | D: 30 mm l NL: 12 mm l T: 10,3 mm l GL:- 44 mm | S: 8 mm
Item no.: TI-RCB95-8RTDelivery in 1-2 business days
WPL Slot Routing Cutter/ Reversable Blades- Slot Routing Cutter, Z1 | D: 8 mm l NL: 20 mm l GL: 60 mm | S: 12 mm
Item no.: I-F041-08021Delivery in 1-2 business days
D: 18 mm l NL: 30 mm l GL: 82 mm | S: 12 mm
Item no.: TI-M1830-12RTReplenishment is on the way
D: 36 mm l NL: 20 mm l D: 13,3 mm l GL: 50 mm | S: 8 mm
Item no.: TI-RCB36-8RTDelivery in 1-2 business days
D: 12mm | NL: 25mm | S: 8mm | GL: 75mm | Z1
Item no.: E-20312Delivery in 1-2 business days
E: 15° | D: 28mm | NL: 24mm | GL: 60mm | S: 8mm | SL: 30mm
Item no.: E-20398Delivery in 1-2 business days
D 16 mm | NL 50 mm | GL 95 mm | S 8 mm | SL 30 mm | Z 2
Item no.: E-20416Delivery in 1-2 business days
D 16 mm | NL 12 mm | GL 55 mm | S 8 mm | SL 30 mm
Item no.: E-20294Delivery in 1-2 business days
D 16 mm | NL 29,5 mm | GL 68 mm | S 8 mm | SL 30 mm
Item no.: E-20323Delivery in 1-2 business days
D 16 mm | NL 50 mm | GL 90 mm | S 8 mm | SL 30 mm | Z 2
Item no.: E-20326Delivery in 1-2 business days
D 16 mm | NL 30 mm | GL 72 mm | S 8 mm | SL 30 mm
Item no.: E-20295Delivery in 1-2 business days
D 16 mm | NL 30 mm | GL 82 mm | S 8 mm | SL 30 mm | Z 2
Item no.: E-20406Delivery in 1-2 business days
D 19 mm | NL 50 mm | GL 108 mm | S 12 mm | SL 40 mm | Z 2
Item no.: E-20327Delivery in 1-2 business days
D: 19 mm | NL: 12 mm | GL: 65 mm | S: 8 mm
Item no.: TI-PGCS19-8RTDelivery in 1-2 business days
D 19 mm | NL 30 mm | GL 82 mm | S 8 mm | SL 30 mm | Z 2
Item no.: E-20409Delivery in 1-2 business days
what are the advantages of a router bit with reversible blade?
Thanks to its exchangeable reversible blades, an insert router impresses with a high degree of versatility and economy. If a blade is no longer suitable for routing, it can simply be turned, as most reversible blades have at least two cutting sides. When all the cutting edges have been worn down, the knife can be replaced at low cost. It is therefore no longer necessary to resharpen the entire router, there is no need to go to a sharpening service. The problem of dimensional differences that occur with conventional milling tools due to resharpening can also be avoided in this way. This means that a high degree of repeat accuracy is achieved during routing. Due to the constant diameter, the tool is always ready for use.
Even though the purchase price is initially higher than for conventional end mills, these routers are worthwhile, especially if the router is used frequently.
Note: For safety's sake, always check that the screws are tight before using insert cutters.