LAGUNA Revo 2436 Lathe

Sturdy lathe for very heavy workpieces | centre width 914 mm | machining diameter 457 mm | 2200 W

At present shipping is only possible to the EU, Switzerland and Norway

Brand: Laguna
Article-No.: I-151-2436
Weight: 264 kg

EUR 5,227.32

incl. VAT / excl. shipping costs
Depending on the delivery address, the VAT may vary at the checkout.

Item is oversized / overweight and will be dispatched by a freight carrier.

Delivery time 3-8 days

LAGUNA Revo 2436 Lathe

Extremely smooth-running lathe thanks to heavy base for machining very large workpieces.

Having a second control panel that mounts in two positions (high or low) sets the Revo 24|36 apart from any other lathe in the world, not only can you turn off the machine from this control panel, but it allows the operator to change speed as well. A switch on the back of the headstock designates whether you control the Revo from the headstock control panel or the corresponding control panel. The E Stop works on both at any given time.

Technical Data

Power (230V): 2.2 kW
Recommended circuit breaker: 16 A
Variable VFD Frequency converter: Delta S1
Speed: 50-3500 rpm
Maximum machining diameter over guideway: 609 mm
.Tip width: 965 mm, extendable
Machine bed width: 208 mm
Spindle thread: M33 x 3.5 mm
Headstock / tailstock taper: MK2 / MK2
Headstock/tailstock opening: 17/17 mm
Pinelon adjustment: 114 mm
Hand rest shank size: 25.4 mm (1")
L x W x H: 1524 x 660 x 1327 mm
Weight: 242 kg
Shipping weight: 255 kg
Packing dimensions: 690 mm x 650 mm x 1550 mm

Features and advantages

80% heavier underframe compared to the REVO 1836 model for turning extra large workpieces.
Solid ground steel machine bed with wide guide.
Two control panels, one can be mounted in two positions on the right-hand side of the machine.
The right-hand control panel ensures full convenience, on/off and speed change.
Cast iron hand rest with easy operation.
Locking the tailstock and headstock on the back.
Powerful induction motor with VFD frequency converter for high torque.
Ergonomic control panel in anodised aluminium with design speed control in duralumin.
Digital speed display from 50-3500 rpm in two stages.
Spindle locking after 14, 36 and 48 points.
Wrenches and mandrels are within reach thanks to tool holder.
Exact adjustment of the centre punch point by laser scale.
Height-adjustable legs for comfortable machine positioning.
Spindle locking at the touch of a button.
Expulsion mandrel with brass tip protects the driver tip.
The machine is delivered partially disassembled in a transport box. Assembly takes approx. 1 hour.