Spiral flush milling cutter solid carbide with double ball bearing shank 8 mm

Flush cutters with double advantage

Flush cutters with spiral flutes generally have the advantage that the cutting geometry means that less lateral pressure can be exerted on the material. This protects the cutter, but also the workpiece.

However, when working with increased pressure on the workpiece, the double ball bearing provides sufficient stability and ensures excellent guidance.

More Information

Trimming Cutter D 10 mm

D 10 mm | NL 25 mm | GL 76 mm | S 8 mm | SL 32 mm

Delivery time 1-2 days

EUR 116.08 *

Compression Cutter Z2+2 - Ø8mm Double Bearing - Solid Carbide

Perfect edges for flush routing | spiral down- & up-cut | better stability thanks to double ball bearing | Z 2+2

Delivery time 1-2 days

EUR 125.66 *

Dual-Cut cutter

A special type of spiral flush cutter made of solid carbide (VHM) with double ball bearing are the Dual-Cut cutters. The counter-rotating grinding of the cutting edges makes it possible to achieve a very clean cutting result, especially with coated board materials, such as HPL-coated or veneered boards.

The spiral (Z 2+2) of the Dual-Cut flush cutter is ground in such a way that the cut on the upper edge of the workpiece is pulled downwards (pulling cut) and the lower edge is pulled upwards in the opposite direction.