Table de fraisage Harvey PURE-1 avec ascenseur sauter FML-BR-K

Données techniques

Harvey router table top cast iron RT-800

• Dimensions router table top
  800 x 590 x 45 mm
• Dimensions opening for insert plate / router lift
  298.5 x 235 x 10 mm
• Dimensions front T-slot
  19.05 x 25.4 x 9.5 mm
• Dimensions rear T-slot
  7.1 x 14.2 x 9 mm
• Weight
  48 kg

Harvey router fence RF-36-M

• Dimensions of fence
  915 x 113.5 x 91 mm
• Dimensions of fence jaws
  450 x 67 mm
• Max. Adjustment travel of stop jaws
  178 mm
• Adjustment travel fine adjustment fence
  12.7 mm
• Adjustment travel for fine adjustment of take-off jaw
  6.35 mm
• Scaling
  metric
• Fine adjustment stop
  0.02 mm (1 turn corresponds to 1 mm adjustment travel)
• Fine adjustment removal jaw
  0.02 mm (1 turn corresponds to 1 mm adjustment travel)
• Ø external extraction nozzle Ø
  63.5 mm
• Ø internal extraction nozzle Ø
  57.5 mm
• Compatible - only with the Harvey router table top steel RT-800
• Weight
  9 kg
• Both stop jaws are supplied in raw MDF (brown)

Harvey router table base COMPASS RT-S for Harvey router table top

• Dimensions (LxWxH)
  664 x 456 x 852 mm
• Weight
  19.5 kg
• Max. Load capacity
  150kg
• Voltage
  230V
• Cable length
  1.70 m
• Max. utilisation
  12 A
• Very high load capacity
• Black surface for a more attractive appearance
• Incl. Safety switch

Harvey mitre fence COMPASS MG-36

• Stop dimensions (L x H x D)
  500 (915) x 66.5 x 35 mm
• Angle range
  +/- 60°
• Gridded angles
  -60°, -45°, -22.5°, 0°, 22.5°, 45°, 60°
• Guide profile (L x W x H)
  460 x 19 x 9 mm
• Fine adjustment accuracy
  0.02 mm
• Weight
  4.1 kg

Sauter router lift FML-BR-K for router motors (red version)

• Inlay plate dimensions
  298 x 235 x 9 mm
• Corner radius of the insert plate
  19.05 mm (3/4")
• Height adjustment travel/rotation
  2 mm
• Max. Adjustment travel
  100 mm
• Height of router lift (max. extended)
  240mm
• Max. Cutter diameter
  86 mm
• Weight
  approx. 4 kg
• Clamping neck Ø / tolerances of the router motor
  43 mm / -0.135 + 0.015
• Required clamping height of the router motor
  20 mm
• Max. Weight of the router motor
  5 kg

Hand crank for sauter router lifts - black

• Size 5 hexagon spanner
• Dimensions (L x W x H)
  52 x 21 x 40 mm
• Black anodised

Suhner router motor UAK 30 RF SPZ12

• Input power
  1,530 watts
• Infinitely variable speed
  3,500 - 30,000 rpm
• Torque
  0.4 Nm
• Voltage
  230 volts / 50 Hz
• Sound pressure level
  86 dB, K = 3 dB (values correspond to the sound pressure level at maximum rotational speed)
• Incl. collet chuck
  8 mm
• Collet chuck up to 12.7 mm (1/2") possible
• Weight
  2.85 kg