Festool Akku-Tischkreissäge CSC SYS 50 EBI-Basic
Livraison sous 1-2 jours ouvrés
2 021,48 €
- 1x Festool Cordless table saw CSC SYS 50 EBI-Basic
- 1x Circular saw blade WOOD FINE CUT HW 168x1,8x20 WD42
- 1x Parallel Side Fence
- 1x push stick
- 1x Riving knife for concealed cuts
- 1x Riving knife with protective hood
- 1x chip collection bag
- 1x Preset profile settig rail
Festool GmbH
Wertstraße 20 73240 Wendlingen a.N. Germany
[email protected]
https://www.festool.de/
Festool Cordless table saw CSC SYS 50 EBI-Basic
Precise sawing to go. The cordless table saw in Systainer format.
The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. It's just as versatile in use, as it is tremendously convenient in its size. Make parallel cuts of up to 280 mm, cross-cut widths of up to 450 mm and angled cuts of -2° to 47°. The unique digital operation produces results with maximum precision, down to accuracies within a tenth of a millimetre. The 2x18 V dual battery system in combination with the brushless EC-TEC motor will impress you with its power and torque – you won't notice any difference compared with mains-powered machines. Together with the UG-CSC-SYS underframe, you have the perfect worktable immediately on hand, and transport from the vehicle to the point of use thus succeeds effortless. The CSC SYS 50: Precise sawing to go.
Données techniques
-
Battery voltage
2 x 18 Volt
-
Idle speed
4,500 - 6,800 rpm
-
Mounting hole saw blade
20.00 mm
-
Angle of inclination
-10 to +47
-
Cutting height 0°
0 - 48 mm
-
Cutting height 45°
0 - 34 mm
-
Cutting height -10°
21 - 32 mm
-
Mitre angle
0 - 70
-
Parallel cutting width
280.00 mm
-
Table height
280.00 mm
-
Dimensions (L x W x H)
512 x 396 x 296 mm
-
Dust extraction connection Ø
27/36 mm
-
Drive type
Battery
-
Weight
15,00 kg
Caractéristiques et avantages
- Versatile: Parallel cuts up to 280 mm; cross cut width of up to 450 mm. Angled cuts from -2° to 47°.
- Practical: At a cutting height of up to 35 mm, through to angled cuts right down to -10°; ideal for undercutting infill panels.
- Compact and mobile: Can be transported with one hand in the practical Systainer format. Even lighter with the UG-CSC-SYS underframe.
- Extreme precision: The height and angle are electrically adjusted at the press of a button via the digital display – accurate to within a tenth of a millimetre.
- Reproduce cuts easily: The height and angle (mm and inches) are set parallax-free via the digital display, i.e. more accurately than any visual judgement. Reproducible cuts are ensured.
- Convenient: Four saw blade positions can be saved and selected via the digital display.
- Highly precise parallel side fence: Robust parallel side fence with double clamp (via just one clamp lever) for exact alignment and perfect cutting results.
- Highly precise angle stop: The angle stop is optimally aligned and centrally clamped via a groove on the slide. For mitre angles between -70° and +70°
- Absolutely judder-free: Ball bearing-mounted slide for parallel and angled cuts with maximum precision
- Powerful: The brushless EC-TEC motor with high speeds of 6800 rpm guarantees fast sawing progress and perfect cutting results
- Long-lasting: The combination of a brushless EC-TEC motor and a dual battery system with two 18 V battery packs (from 4.0 Ah) ensures a long operating performance
- Long-lasting: The brushless EC-TEC motor is long-lasting, robust and maintenance-free
- Work appropriately for the material: With saw blades for every material; speeds appropriate for the material can be preselected via the digital display
- Dust-free: Chip collection bag for dust-free work, even without a mobile dust extractor
- Healthy working with a system: Ideal also in combination with the Festool cordless extractors
- Compatible: Fits together with the entire Festool Systainer system and bott vehicle equipment
- Flexible underframe: The UG-CSC-SYS underframe is the perfect solution for transport to the point of use and the ideal worktable in one
- Unique: Three-year warranty for battery packs and chargers too
Accessoires compatibles
Châssis pour scie circulaire sur table CSC-SYS 50 Hauteur de travail : 677 mm | Poids : 18,13 kg
Réf. art. : F-577001Livraison sous 1-2 jours ouvrés
For TS 60 K, CSC-SYS 50
Réf. art. : F-205765Livraison sous 1-2 jours ouvrés
For TS 60 K, CSC-SYS 50
Réf. art. : F-205764Livraison sous 1-2 jours ouvrés
Pour la plupart des outils sans fil 18 V 4 batteries 18 V | 1 chargeur rapide | en Systainer
Réf. art. : F-577104Livraison sous 1-2 jours ouvrés
Pour TS 60 K, TSV 60 K, CSC SYS 50
Réf. art. : F-578567Livraison sous 1-2 jours ouvrés
Pour TS 60 K, TSV 60 K, CSC SYS 50
Réf. art. : F-578568Livraison sous 1-2 jours ouvrés
Pour TS 60 K, TSV 60 K, CSC SYS 50
Réf. art. : F-578566Livraison sous 1-2 jours ouvrés
For TS 60 K, CSC-SYS 50
Réf. art. : F-205766Livraison sous 1-2 jours ouvrés
For TS 60 K, CSC-SYS 50
Réf. art. : F-205763Livraison sous 1-2 jours ouvrés
pour tous les appareils 18 Volt (sauf ETSC 125, RTSC 400, DTSC 400)
Réf. art. : F-205034Livraison sous 1-2 jours ouvrés
Alternatives intéressantes
Scie circulaire sur table professionnelle et très bien équipée | Lame de scie pivotante | Finition soignée | Ajustement facile
Réf. art. : I-151-FUSION3DROLivraison sous 1-2 jours ouvrés