Lame de scie circulaire HM coupes moyennes 500 x 4,0/2,8 x 30 mm, Z=72 WZ
Livraison sous 1-2 jours ouvrés
259,04 €
- 1x Circular saw blade
Karnasch Professional Tools GmbH
Siemensstraße 1 68542 Heddesheim Germany
[email protected]
Karnasch Professional Tools GmbH
Siemensstraße 1 68542 Heddesheim Germany
[email protected]
https://karnasch.tools/en/
Lame de scie circulaire HM - pour tous les types de bois pour coupes longitudinales et transversales - qualité de coupe moyenne500 x 4,0/2,8 x 30 mm, Z=72 WZ (denture alternée)Qualité de coupe moyenne dans tous les bois, matériaux de panneaux, revêtus sur une face de placage ou de plastique, tissus durs, papier dur et panneaux minéraux.Isolation sonore et anti-vibrations.Pour scies circulaires de table, scies à panneaux (par ex. de REICH, HOLZ-HER, STRIEBIG, ALTENDORF)
Données techniques
- D 500 x 4.0/3.0 x 30 mm
- Teeth Z= 72 WZ (alternate tooth) with 15° angle of rake
-
Side holes for driving pins
2/7/42 + 2/9/46,4 + 2/10/60 + 2/10/80
-
Recommended speed Ø 500 mm
1800-3500 rpm
Caractéristiques et avantages
- Ideally suited for cross sections in softwood, hardwood and exotic wood.
- Ideally suited for cutting soft wood, hard wood and exotic wood along the grain.
- Ideally suited for cutting bonded wood, blockboard and veneer plywood and laminated wood.
- Ideally suited for cutting chipboard, hard fibre board and boards without laminate.
- Well suited for veneers and profiled wood.
- Well suited for sawing solid surface materials like Corian, Noblan, Hi-Macs, Staron, Varicor and Rausolid.
- Well suited for HPL solid boards such as Trespa, Duropal, Formica, Kronospan and Resopal.
- Well suited for plastics, Plexiglas, duroplastics and thermoplastics.
- Okay for fibre cement boards, Eternit, GRP and GFK.
- Saw blades are balanced from Ø 400 mm.
- Main body made of first-class steel quality and laser-cut.
- Special HM teeth, adapted to each type of saw.
- Perfect grinding, lowest tolerances (H7) and finest grain of the carbide guarantee excellent cutting quality.
- Absolutely precise, low-noise and smooth running.
- Honed drillings.
- High-quality multiple soldering for more stability and protection against damage.
- Optionally we recommend the purchase of a Industrial cleaner TR-CLEAN-500 to clean and maintain the saw blades. In addition, when cutting metal, the use of a lubricant such as TR-TRENDIWAX significantly increases the service life.